PRIUS BEARINGS · SLEWING RING BEARING
02-0626-01
slewing ring bearing
02-0626-01 is listed as a Rollix catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 740 mm, inside diameter 493 mm, height 76 mm. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL 02-0626-01
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
02-0626-01
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Module 6 drive and two 24-hole attachment circles
For 02-0626-01, review the 740 mm outside diameter, 493 mm inside diameter and 76 mm height together with the geared drive. The table lists module 6 and 83 teeth; these should be checked against the existing pinion rather than inferred from the 0626 designation.
What to check in your assembly
- Match the 692 mm outer and 560 mm inner mounting circles, each listed with 24 holes of 22 mm diameter.
- Check the 66 mm ring heights against the axial seating faces.
- Supply tooth geometry, mesh position, torque and reversal frequency for the gear review.
Are the identical hole counts enough to interchange inner and outer mounting details?
The mounting circles are different. Check which ring rotates and the position of each companion flange on the complete drawing.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for 02-0626-01?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For 02-0626-01, provide the complete reference and suffix, confirm outside diameter 740 mm, inside diameter 493 mm, height 76 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.