PRIUS BEARINGS · SLEWING RING BEARING
02-0935-00
slewing ring bearing
02-0935-00 is listed as a Rollix catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 1050 mm, inside diameter 794 mm, height 82 mm. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL 02-0935-00
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
02-0935-00
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Different ring heights within an 82 mm envelope
02-0935-00 has a 1050 mm outside diameter, 794 mm inside diameter and 82 mm overall height. Its 66 mm and 72 mm ring heights call for an axial stack review when an existing rotating assembly is being replaced.
What to check in your assembly
- Check the 1000 mm outer and 870 mm inner mounting circles, each listed with 36 holes of 22 mm diameter.
- Confirm the module 8, 100-tooth gear against the pinion drawing and intended backlash.
- Provide the locating shoulders, seal space, bolt access and support structure as well as the envelope.
Can the 02-0626-01 and 02-0935-00 references share the same pinion specification?
The listed module and tooth count differ. Each gear mesh needs its own drawing and centre-distance review.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for 02-0935-00?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For 02-0935-00, provide the complete reference and suffix, confirm outside diameter 1050 mm, inside diameter 794 mm, height 82 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.