Slewing Rings/Liebherr references/ROD01250← View all models

PRIUS BEARINGS · SLEWING RING BEARING

ROD01250
slewing ring bearing

ROD01250 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 1461.6 mm, inside diameter 1103 mm, height 132 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL ROD01250
Liebherr catalogue section reference for ROD01250

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

ROD01250
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelROD01250
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)542 kg
Outside diameter Da (mm)1,461.6 mm
Inside diameter di (mm)1,103 mm
Ring height H (mm)132 mm
Outer reference ØO (mm)1,282 mm
Inner reference ØU (mm)1,280 mm
Outer ring height H1 (mm)106 mm
Inner ring height H2 (mm)123 mm
Outer mounting length La (mm)1,355 mm
Inner mounting length Li (mm)1,155 mm
Mounting hole count36
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)1,428 mm
Gear module12
Gear tooth count119
Tooth correction6
Gear tip reduction k·m (mm)-1.2
Tooth width b (mm)106 mm
Tooth force, standard (kN)116.7 kN
Tooth force, maximum (kN)233.4 kN
Basic static axial load rating C0a (kN)9,282 kN
Basic dynamic axial load rating Ca (kN)1,234 kN
Bearing typeROD 21 DA external gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD01381outside diameter 1500 mm, inside diameter 1164 mm, height 120 mm →Liebherr · Slewing ring bearingROD01400outside diameter 1635.2 mm, inside diameter 1253 mm, height 132 mm →Liebherr · Slewing ring bearingKUD01506outside diameter 1617 mm, inside diameter 1334.4 mm, height 123 mm →Liebherr · Slewing ring bearingKUD01440outside diameter 1653.6 mm, inside diameter 1320 mm, height 120 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for ROD01250?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For ROD01250, provide the complete reference and suffix, confirm outside diameter 1461.6 mm, inside diameter 1103 mm, height 132 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.