Slewing Rings/Liebherr references/KUD02506← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD02506
slewing ring bearing

KUD02506 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2685 mm, inside diameter 2256.8 mm, height 184 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD02506
Liebherr catalogue section reference for KUD02506

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD02506
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD02506
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)1,850 kg
Outside diameter Da (mm)2,685 mm
Inside diameter di (mm)2,256.8 mm
Ring height H (mm)184 mm
Outer reference ØO (mm)2,504 mm
Inner reference ØU (mm)2,508 mm
Outer ring height H1 (mm)172 mm
Inner ring height H2 (mm)172 mm
Outer mounting length La (mm)2,613 mm
Inner mounting length Li (mm)2,396 mm
Mounting hole count68
Mounting hole diameter (mm)33 mm
Hole pitch diameter d (mm)2,268 mm
Gear module14
Gear tooth count-162
Tooth correction-7
Gear tip reduction k·m (mm)-1.4
Tooth width b (mm)140 mm
Tooth force, standard (kN)170.4 kN
Tooth force, maximum (kN)340.9 kN
Basic static axial load rating C0a (kN)36,424 kN
Basic dynamic axial load rating Ca (kN)2,150 kN
Bearing typeKUD 50 WJ internal gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD02559outside diameter 2725 mm, inside diameter 2250 mm, height 185 mm →Liebherr · Slewing ring bearingKUD02497outside diameter 2676 mm, inside diameter 2315 mm, height 184 mm →Liebherr · Slewing ring bearingKUD02397outside diameter 2576 mm, inside diameter 2215 mm, height 184 mm →Liebherr · Slewing ring bearingKUD02406outside diameter 2585 mm, inside diameter 2158.8 mm, height 184 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD02506?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD02506, provide the complete reference and suffix, confirm outside diameter 2685 mm, inside diameter 2256.8 mm, height 184 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.