Slewing Rings/Liebherr references/KUD02056← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD02056
slewing ring bearing

KUD02056 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2186 mm, inside diameter 1850.8 mm, height 137 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD02056
Liebherr catalogue section reference for KUD02056

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD02056
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD02056
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)888 kg
Outside diameter Da (mm)2,186 mm
Inside diameter di (mm)1,850.8 mm
Ring height H (mm)137 mm
Outer reference ØO (mm)2,054 mm
Inner reference ØU (mm)2,058 mm
Outer ring height H1 (mm)125 mm
Inner ring height H2 (mm)125 mm
Outer mounting length La (mm)2,134 mm
Inner mounting length Li (mm)1,975 mm
Mounting hole count60
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)1,862 mm
Gear module14
Gear tooth count-133
Tooth correction-7
Gear tip reduction k·m (mm)-1.4
Tooth width b (mm)125 mm
Tooth force, standard (kN)160.6 kN
Tooth force, maximum (kN)321.3 kN
Basic static axial load rating C0a (kN)20,946 kN
Basic dynamic axial load rating Ca (kN)1,385 kN
Bearing typeKUD 35 WJ internal gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingROD02000outside diameter 2236.8 mm, inside diameter 1853 mm, height 132 mm →Liebherr · Slewing ring bearingKUD02047outside diameter 2251.2 mm, inside diameter 1914 mm, height 137 mm →Liebherr · Slewing ring bearingKUD01960outside diameter 2090 mm, inside diameter 1722 mm, height 138 mm →Liebherr · Slewing ring bearingKUD01997outside diameter 2209.2 mm, inside diameter 1846 mm, height 154 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD02056?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD02056, provide the complete reference and suffix, confirm outside diameter 2186 mm, inside diameter 1850.8 mm, height 137 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.