Slewing Rings/Liebherr references/KUD01960← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD01960
slewing ring bearing

KUD01960 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2090 mm, inside diameter 1722 mm, height 138 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD01960
Liebherr catalogue section reference for KUD01960

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD01960
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD01960
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)851 kg
Outside diameter Da (mm)2,090 mm
Inside diameter di (mm)1,722 mm
Ring height H (mm)138 mm
Outer reference ØO (mm)1,931 mm
Inner reference ØU (mm)1,926 mm
Outer ring height H1 (mm)132 mm
Inner ring height H2 (mm)104 mm
Outer mounting length La (mm)2,045 mm
Inner mounting length Li (mm)1,850 mm
Mounting hole count52
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)1,736 mm
Gear module14
Gear tooth count-124
Tooth correction-7
Tooth width b (mm)104 mm
Tooth force, standard (kN)133.6 kN
Tooth force, maximum (kN)267.2 kN
Basic static axial load rating C0a (kN)13,441 kN
Basic dynamic axial load rating Ca (kN)1,022 kN
Bearing typeKUD 35 ZJ internal gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD01747outside diameter 2037.6 mm, inside diameter 1714 mm, height 137 mm →Liebherr · Slewing ring bearingKUD01847outside diameter 2037.6 mm, inside diameter 1714 mm, height 137 mm →Liebherr · Slewing ring bearingKUD01856outside diameter 1986 mm, inside diameter 1670.4 mm, height 137 mm →Liebherr · Slewing ring bearingKUD02056outside diameter 2186 mm, inside diameter 1850.8 mm, height 137 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD01960?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD01960, provide the complete reference and suffix, confirm outside diameter 2090 mm, inside diameter 1722 mm, height 138 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.