PRIUS BEARINGS · SLEWING RING BEARING
32-40 4500/2-07510
slewing ring bearing
32-40 4500/2-07510 is listed as a IMO catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 4738 mm, inside diameter 4128 mm. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL 32-40 4500/2-07510
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
32-40 4500/2-07510
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Internal gear and large-ring installation planning
The 32-40 4500/2-07510 catalogue reference has a listed 4738 mm outside diameter and 4128 mm inside diameter. Its G entry is weight, so the overall axial height must be established from the exact section drawing.
What to check in your assembly
- Review the 4660 mm outer and 4335 mm inner attachment references and the ring-specific hole layout.
- Check the module 24, 173-tooth internal gear and the pinion's operating clearance and backlash.
- Include companion-structure stiffness, installation access, lifting arrangements and combined operating loads for this large ring.
Can the table's weight entry define the installation height?
Use the column units and the section drawing. G is the mass entry in kilograms; an axial-height dimension cannot be inferred from it.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for 32-40 4500/2-07510?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For 32-40 4500/2-07510, provide the complete reference and suffix, confirm outside diameter 4738 mm, inside diameter 4128 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.