PRIUS BEARINGS · SLEWING RING BEARING
VLA 20 0414 N
slewing ring bearing
VLA 20 0414 N is listed as a Schaeffler catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 503.3 mm, inside diameter 304 mm, height 56 mm. Send the complete model suffix, mounting details and operating loads for review.
EXTERNAL GEAR / VLA 20 0414 NDIMENSIONAL REFERENCE
MODEL VLA 20 0414 N
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
VLA 20 0414 N
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Check the N suffix and both bolt circles
VLA 20 0414 N is listed as an external-gear four-point contact ball reference. The envelope is 503.3 mm outside diameter, 304 mm inside diameter and 56 mm height. Preserve the N suffix when comparing the original documentation with an alternative.
What to check in your assembly
- Check the 455 mm outer attachment circle with 10 holes and the 332 mm inner circle with 12 holes.
- Supply the original suffix definition, clearance requirement and lubrication specification.
- Use the corresponding static and dynamic load curves for the actual axial, radial and moment loading; catalogue values do not replace the combined-load review.
Does the base reference VLA 20 0414 define every N-suffix requirement?
Confirm the suffix-specific drawing and technical conditions. A base-reference dimensional table may omit details required for the installed bearing.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for VLA 20 0414 N?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For VLA 20 0414 N, provide the complete reference and suffix, confirm outside diameter 503.3 mm, inside diameter 304 mm, height 56 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.