PRIUS BEARINGS · SLEWING RING BEARING
L6-43E9Z
slewing ring bearing
L6-43E9Z is listed as a Rotek catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 46.87 in, inside diameter 38.74 in. Send the complete model suffix, mounting details and operating loads for review.
EXTERNAL GEAR / L6-43E9ZDIMENSIONAL REFERENCE
MODEL L6-43E9Z
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
L6-43E9Z
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
External gearing specified in diametral pitch
L6-43E9Z is listed as a four-point contact ball reference with an external gear. The gear is described using inch-based diametral pitch: 3 DP, 139 teeth and a 46.33 in pitch diameter. Keep that system consistent when reviewing the drive.
What to check in your assembly
- Provide the pinion's DP, tooth count, pressure angle and backlash requirement rather than substituting a metric module value.
- Confirm the 46.87 in outside and 38.74 in inside envelope, plus all missing axial features from the original drawing.
- Check each ring's mounting pattern and rotating-member orientation independently before machining a companion flange.
Is 3 DP the same specification as module 3?
DP is an inch-based gear designation and module is metric. They are different specifications; supply the original pinion drawing for a compatible mesh review.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for L6-43E9Z?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For L6-43E9Z, provide the complete reference and suffix, confirm outside diameter 46.87 in, inside diameter 38.74 in, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.