PRIUS BEARINGS · SLEWING RING BEARING
A14-24P1A
slewing ring bearing
A14-24P1A is listed as a Rotek catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 28.75 in, inside diameter 19.12 in, height 3.25 in. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL A14-24P1A
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
A14-24P1A
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
An inch-dimensioned gearless support
A14-24P1A is listed as a four-point contact ball, gearless reference with a 28.75 in outside diameter, 19.12 in inside diameter and 3.25 in height. A replacement review should account for the separate drive and the supporting flange rather than selecting from the nominal 24 designation.
What to check in your assembly
- Check the 27.375 in outer and 20.625 in inner hole circles against the companion structure.
- Include which ring rotates, the drive connection and the radial, axial and overturning loads at the bearing.
- Request the actual bearing mass for handling calculations; nominal thrust capacity is a load rating, not a weight.
Can I select this bearing from the nominal thrust rating alone?
Include the combined load case, moment arm, mounting bolts and support stiffness. A single catalogue thrust value does not establish capacity for an assembled mechanism.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for A14-24P1A?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For A14-24P1A, provide the complete reference and suffix, confirm outside diameter 28.75 in, inside diameter 19.12 in, height 3.25 in, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.