PRIUS BEARINGS · SLEWING RING BEARING
06-0675-00
slewing ring bearing
06-0675-00 is listed as a Rollix catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 816 mm, inside diameter 573 mm, height 90 mm. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL 06-0675-00
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
06-0675-00
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Gear mesh and unequal ring heights
The 816 mm outside diameter and 573 mm inside diameter establish the radial envelope of 06-0675-00. Its 90 mm overall height is distinct from the listed 73 mm and 70 mm ring heights, which matter when reviewing the support and axial offsets.
What to check in your assembly
- Check module 6 and 132 teeth against the mating pinion, including mesh position and tooth condition.
- Compare the 753 mm outer and 604 mm inner mounting circles; each is listed with 18 holes of 22 mm diameter.
- Include the maximum starting torque and duty cycle as well as the normal operating load.
Is module 6 sufficient to define a replacement gear?
Also provide tooth count, pressure angle, profile correction, face width, pinion geometry and backlash. Confirm the final mesh on the drawing.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for 06-0675-00?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For 06-0675-00, provide the complete reference and suffix, confirm outside diameter 816 mm, inside diameter 573 mm, height 90 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.