PRIUS BEARINGS · SLEWING RING BEARING
03-0217-00
slewing ring bearing
03-0217-00 is listed as a Rollix catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 290 mm, inside diameter 150 mm, height 41 mm. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL 03-0217-00
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
03-0217-00
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
Through holes and threaded holes need separate checks
03-0217-00 uses a 290 mm outside diameter and 150 mm inside diameter within a 41 mm overall height. Its attachment table lists 14 mm outer holes and M12 inner holes, so the two entries should not be treated as identical clearance-hole dimensions.
What to check in your assembly
- Check the 265 mm outer and 175 mm inner mounting circles, each listed with 16 holes.
- Confirm the M12 thread pitch, usable thread depth and fastener engagement on the final inner-ring drawing.
- Review bolt length against the 41 mm and 40 mm ring heights and the thickness of the mating flanges.
Does M12 mean a 12 mm clearance hole?
M12 denotes a metric thread designation. Confirm the thread specification and engagement requirements before choosing bolts or drilling the companion structure.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for 03-0217-00?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For 03-0217-00, provide the complete reference and suffix, confirm outside diameter 290 mm, inside diameter 150 mm, height 41 mm, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.