Slewing Rings/Liebherr references/ROD02053← View all models

PRIUS BEARINGS · SLEWING RING BEARING

ROD02053
slewing ring bearing

ROD02053 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2261.7 mm, inside diameter 1900 mm, height 114 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL ROD02053
Liebherr catalogue section reference for ROD02053

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

ROD02053
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelROD02053
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)732 kg
Outside diameter Da (mm)2,261.7 mm
Inside diameter di (mm)1,900 mm
Ring height H (mm)114 mm
Outer reference ØO (mm)2,081 mm
Inner reference ØU (mm)2,081 mm
Outer ring height H1 (mm)90 mm
Inner ring height H2 (mm)108 mm
Outer mounting length La (mm)2,166 mm
Inner mounting length Li (mm)1,960 mm
Mounting hole count90
Mounting hole diameter (mm)27 mm
Hole pitch diameter d (mm)2,232 mm
Gear module9
Gear tooth count248
Tooth correction6.8
Gear tip reduction k·m (mm)-0.9
Tooth width b (mm)90 mm
Tooth force, standard (kN)78 kN
Tooth force, maximum (kN)157 kN
Basic static axial load rating C0a (kN)21,263 kN
Basic dynamic axial load rating Ca (kN)1,904 kN
Bearing typeROD 18 DA external gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD02031outside diameter 2253.6 mm, inside diameter 1910 mm, height 120 mm →Liebherr · Slewing ring bearingKUD02150outside diameter 2377.2 mm, inside diameter 1989 mm, height 114 mm →Liebherr · Slewing ring bearingROD01957outside diameter 2176.2 mm, inside diameter 1792 mm, height 115 mm →Liebherr · Slewing ring bearingROD02025outside diameter 2247 mm, inside diameter 1882 mm, height 104 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for ROD02053?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For ROD02053, provide the complete reference and suffix, confirm outside diameter 2261.7 mm, inside diameter 1900 mm, height 114 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.