Slewing Rings/Liebherr references/ROD01847← View all models

PRIUS BEARINGS · SLEWING RING BEARING

ROD01847
slewing ring bearing

ROD01847 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2050.2 mm, inside diameter 1704 mm, height 102 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL ROD01847
Liebherr catalogue section reference for ROD01847

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

ROD01847
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelROD01847
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)579 kg
Outside diameter Da (mm)2,050.2 mm
Inside diameter di (mm)1,704 mm
Ring height H (mm)102 mm
Outer reference ØO (mm)1,879 mm
Inner reference ØU (mm)1,865 mm
Outer ring height H1 (mm)80 mm
Inner ring height H2 (mm)93 mm
Outer mounting length La (mm)1,955 mm
Inner mounting length Li (mm)1,761 mm
Mounting hole count72/73
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)2,025 mm
Gear module9
Gear tooth count225
Tooth correction4.5
Gear tip reduction k·m (mm)-0.9
Tooth width b (mm)75 mm
Tooth force, standard (kN)65 kN
Tooth force, maximum (kN)130 kN
Basic static axial load rating C0a (kN)16,006 kN
Basic dynamic axial load rating Ca (kN)1,419 kN
Bearing typeROD 15 DA external gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD01850outside diameter 2037.6 mm, inside diameter 1723 mm, height 94 mm →Liebherr · Slewing ring bearingKUD02000outside diameter 2209.2 mm, inside diameter 1855 mm, height 104 mm →Liebherr · Slewing ring bearingKUD01950outside diameter 2133.6 mm, inside diameter 1823 mm, height 94 mm →Liebherr · Slewing ring bearingROD01972outside diameter 2176.2 mm, inside diameter 1816 mm, height 109 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for ROD01847?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For ROD01847, provide the complete reference and suffix, confirm outside diameter 2050.2 mm, inside diameter 1704 mm, height 102 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.