Slewing Rings/Liebherr references/KUD02156← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD02156
slewing ring bearing

KUD02156 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2320 mm, inside diameter 1920.8 mm, height 170 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD02156
Liebherr catalogue section reference for KUD02156

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD02156
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD02156
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)1,374 kg
Outside diameter Da (mm)2,320 mm
Inside diameter di (mm)1,920.8 mm
Ring height H (mm)170 mm
Outer reference ØO (mm)2,154 mm
Inner reference ØU (mm)2,158 mm
Outer ring height H1 (mm)158 mm
Inner ring height H2 (mm)158 mm
Outer mounting length La (mm)2,254 mm
Inner mounting length Li (mm)2,055 mm
Mounting hole count60
Mounting hole diameter (mm)30 mm
Hole pitch diameter d (mm)1,932 mm
Gear module14
Gear tooth count-138
Tooth correction-7
Gear tip reduction k·m (mm)-1.4
Tooth width b (mm)140 mm
Tooth force, standard (kN)179.9 kN
Tooth force, maximum (kN)359.8 kN
Basic static axial load rating C0a (kN)28,274 kN
Basic dynamic axial load rating Ca (kN)1,827 kN
Bearing typeKUD 45 WJ internal gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD02147outside diameter 2311 mm, inside diameter 1980 mm, height 170 mm →Liebherr · Slewing ring bearingKUD02256outside diameter 2420 mm, inside diameter 2018.8 mm, height 170 mm →Liebherr · Slewing ring bearingKUD02199outside diameter 2350 mm, inside diameter 1920 mm, height 156 mm →Liebherr · Slewing ring bearingKUD02097outside diameter 2276 mm, inside diameter 1915 mm, height 184 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD02156?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD02156, provide the complete reference and suffix, confirm outside diameter 2320 mm, inside diameter 1920.8 mm, height 170 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.