Slewing Rings/Kaydon references/MTE-590← View all models

PRIUS BEARINGS · SLEWING RING BEARING

MTE-590
slewing ring bearing

MTE-590 is listed as a Kaydon catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 33.534 in, inside diameter 23.125 in, height 2.875 in. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL MTE-590
Kaydon catalogue section reference for MTE-590

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

MTE-590
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelMTE-590
Brand / alternativePRIUS BEARINGS · Alternative for Kaydon
TypeSlewing ring bearing
Outside diameter OD (in)33.534 in
Inside diameter ID (in)23.125 in
Overall height HT (in)2.875 in
Reference height (in)2.563 in
Weight (lb)283 lb
Gear ConfigurationExternal gear
Outer hole circle OBC (in)30.625 in
Inner hole circle IBC (in)24.875 in
Mounting hole count18 / 24
Mounting hole diameter (mm)0.938 in
Moment rating (ft-lb)338,700 ft-lb
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Kaydon · Slewing ring bearingMTE-705outside diameter 38.201 in, inside diameter 27.75 in, height 2.875 in →Kaydon · Slewing ring bearingMTE-540outside diameter 29.65 in, inside diameter 21.25 in, height 2.375 in →Kaydon · Slewing ring bearingMTE-730outside diameter 41.85 in, inside diameter 28.75 in, height 3.25 in →Kaydon · Slewing ring bearingMTE-470outside diameter 26.9 in, inside diameter 18.5 in, height 2.375 in →

FREQUENT QUESTIONS

Can PRIUS review an alternative for MTE-590?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For MTE-590, provide the complete reference and suffix, confirm outside diameter 33.534 in, inside diameter 23.125 in, height 2.875 in, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.