PRIUS BEARINGS · SLEWING RING BEARING
MTE-145
slewing ring bearing
MTE-145 is listed as a Kaydon catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 12.286 in, inside diameter 5.709 in, height 1.968 in. Send the complete model suffix, mounting details and operating loads for review.
DIMENSIONAL REFERENCE
MODEL MTE-145
Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.
ENGINEERING DATA
MTE-145
parameters
Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.
APPLICATION & INTERCHANGE REVIEW
MTE external gear and a separate reference height
MTE-145 is listed with an external gear, a 12.286 in outside diameter, 5.709 in inside diameter and 1.968 in overall height. The 1.732 in reference height describes another feature and should not replace the overall axial envelope in an installation layout.
What to check in your assembly
- Check the 10.630 in outer and 6.890 in inner hole-circle references, with the complete ring-specific attachment pattern.
- Provide the pinion drawing and verify tooth geometry, backlash and drive torque before confirming an alternative.
- Include moment arm, axial and radial loads, flange stiffness and operating cycle for the load review.
Can a model with the same 12.286 in outside diameter be treated as an MTE-145 replacement?
Check the inside diameter, both axial dimensions, bolt pattern, gear mesh and load case. A single matching diameter is insufficient to establish an interchange.
NEED A MATCH?
Send us your
drawing or load case.
We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.
Start an enquiry →MODEL SELECTION
Related slewing
ring bearings
Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.
FREQUENT QUESTIONS
Can PRIUS review an alternative for MTE-145?
We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.
What information is needed for selection?
For MTE-145, provide the complete reference and suffix, confirm outside diameter 12.286 in, inside diameter 5.709 in, height 1.968 in, and include gear configuration, mounting-hole details, loads and operating speed.
Can you check an alternative from a drawing or sample?
Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.