Slewing Rings/Rotek references/A14-48E22← View all models

PRIUS BEARINGS · SLEWING RING BEARING

A14-48E22
slewing ring bearing

A14-48E22 is listed as a Rotek catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 56.24 in, inside diameter 41.38 in, height 4.75 in. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review
PRIUS BEARINGS A14-48E22 external gear slewing ring bearingEXTERNAL GEAR / A14-48E22

DIMENSIONAL REFERENCE

MODEL A14-48E22
Rotek catalogue section reference for A14-48E22

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

A14-48E22
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelA14-48E22
Brand / alternativePRIUS BEARINGS · Alternative for Rotek
TypeFour-point contact ball · External gear
Outside diameter OD (in)56.240
Inside diameter ID (in)41.38
Overall height HT (in)4.75
Weight (lb)1170
Outer hole circle OBC (in)52.000
Outer mounting hole count36
Inner hole circle IBC (in)44.000
Inner mounting hole count36
Nominal thrust capacity (lb)1750000
Nominal moment capacity (ft-lb)1600000
Gear pitch diameter PD (in)55.600
Diametral pitch DP2.5
Gear tooth count139
Tangential tooth load F (lb)27800
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Rotek · Four-point contact ball · External gearA14-56P1Eoutside diameter 61.64 in, inside diameter 49.5 in, height 4.52 in →Rotek · Four-point contact ball · External gearA14-34E31outside diameter 38.65 in, inside diameter 28.25 in, height 4.92 in →Rotek · Four-point contact ball · External gearA14-22E1Boutside diameter 28.4 in, inside diameter 17.13 in, height 3.44 in →Rotek · Four-point contact ball · External gearA14-22E1B1outside diameter 28.4 in, inside diameter 17.13 in, height 3.44 in →

FREQUENT QUESTIONS

Can PRIUS review an alternative for A14-48E22?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For A14-48E22, provide the complete reference and suffix, confirm outside diameter 56.24 in, inside diameter 41.38 in, height 4.75 in, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.