Slewing Rings/Rotek references/3R10-111N2F← View all models

PRIUS BEARINGS · SLEWING RING BEARING

3R10-111N2F
slewing ring bearing

3R10-111N2F is listed as a Rotek catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 119.5 in, inside diameter 98.4 in, height 8.75 in. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL 3R10-111N2F
Rotek catalogue section reference for 3R10-111N2F

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

3R10-111N2F
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

Model3R10-111N2F
Brand / alternativePRIUS BEARINGS · Alternative for Rotek
TypeFour-point contact ball · Internal gear
Outside diameter OD (in)119.50
Inside diameter ID (in)98.400
Overall height HT (in)8.75
Gear pitch diameter PD (in)100.000
Diametral pitch DP1.25
Gear tooth count125
Tangential tooth load F (lb)82300
Weight (lb)6862
Outer mounting hole count53
Inner mounting hole count72
Static radial capacity (lb)444000
Nominal thrust capacity (lb)7568000
Nominal moment capacity (ft-lb)12861000
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Rotek · Four-point contact ball · Internal gear3R10-117N3Doutside diameter 125.62 in, inside diameter 106.333 in, height 8.38 in →Rotek · Four-point contact ball · Internal gear3R13-122N1Boutside diameter 131.25 in, inside diameter 109.6 in, height 9 in →Rotek · Four-point contact ball · Internal gear3R10-98N1Boutside diameter 107 in, inside diameter 87.165 in, height 8.88 in →Rotek · Four-point contact ball · Internal gear3R8-122N1Aoutside diameter 130.25 in, inside diameter 109.6 in, height 7.75 in →

FREQUENT QUESTIONS

Can PRIUS review an alternative for 3R10-111N2F?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For 3R10-111N2F, provide the complete reference and suffix, confirm outside diameter 119.5 in, inside diameter 98.4 in, height 8.75 in, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.