Slewing Rings/Liebherr references/KUD01995← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD01995
slewing ring bearing

KUD01995 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 2115 mm, inside diameter 1764 mm, height 120 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD01995
Liebherr catalogue section reference for KUD01995

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD01995
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD01995
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)716 kg
Outside diameter Da (mm)2,115 mm
Inside diameter di (mm)1,764 mm
Ring height H (mm)120 mm
Outer reference ØO (mm)1,972 mm
Inner reference ØU (mm)1,966 mm
Outer ring height H1 (mm)114 mm
Inner ring height H2 (mm)91 mm
Outer mounting length La (mm)2,070 mm
Inner mounting length Li (mm)1,890 mm
Mounting hole count48
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)1,778 mm
Gear module14
Gear tooth count-127
Tooth correction-7
Tooth width b (mm)91 mm
Tooth force, standard (kN)116.9 kN
Tooth force, maximum (kN)233.8 kN
Basic static axial load rating C0a (kN)11,715 kN
Basic dynamic axial load rating Ca (kN)876 kN
Bearing typeKUD 30 ZJ internal gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD01897outside diameter 2061.6 mm, inside diameter 1783 mm, height 123 mm →Liebherr · Slewing ring bearingROD01957outside diameter 2176.2 mm, inside diameter 1792 mm, height 115 mm →Liebherr · Slewing ring bearingKUD01906outside diameter 2017 mm, inside diameter 1730.4 mm, height 123 mm →Liebherr · Slewing ring bearingKUD02031outside diameter 2253.6 mm, inside diameter 1910 mm, height 120 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD01995?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD01995, provide the complete reference and suffix, confirm outside diameter 2115 mm, inside diameter 1764 mm, height 120 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.