Slewing Rings/Liebherr references/KUD01647← View all models

PRIUS BEARINGS · SLEWING RING BEARING

KUD01647
slewing ring bearing

KUD01647 is listed as a Liebherr catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 1833.6 mm, inside diameter 1514 mm, height 137 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL KUD01647
Liebherr catalogue section reference for KUD01647

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

KUD01647
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelKUD01647
Brand / alternativePRIUS BEARINGS · Alternative for Liebherr
TypeSlewing ring bearing
Weight (kg)691 kg
Outside diameter Da (mm)1,833.6 mm
Inside diameter di (mm)1,514 mm
Ring height H (mm)137 mm
Outer reference ØO (mm)1,645 mm
Inner reference ØU (mm)1,649 mm
Outer ring height H1 (mm)125 mm
Inner ring height H2 (mm)125 mm
Outer mounting length La (mm)1,725 mm
Inner mounting length Li (mm)1,566 mm
Mounting hole count52
Mounting hole diameter (mm)24 mm
Hole pitch diameter d (mm)1,800 mm
Gear module12
Gear tooth count150
Tooth correction6
Gear tip reduction k·m (mm)-1.2
Tooth width b (mm)120 mm
Tooth force, standard (kN)139.1 kN
Tooth force, maximum (kN)278.3 kN
Basic static axial load rating C0a (kN)16,732 kN
Basic dynamic axial load rating Ca (kN)1,274 kN
Bearing typeKUD 35 WA external gear
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Liebherr · Slewing ring bearingKUD01656outside diameter 1786 mm, inside diameter 1466.4 mm, height 137 mm →Liebherr · Slewing ring bearingKUD01756outside diameter 1886 mm, inside diameter 1562.4 mm, height 137 mm →Liebherr · Slewing ring bearingROD01600outside diameter 1831.2 mm, inside diameter 1402 mm, height 132 mm →Liebherr · Slewing ring bearingKUD01606outside diameter 1817 mm, inside diameter 1538.4 mm, height 123 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for KUD01647?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For KUD01647, provide the complete reference and suffix, confirm outside diameter 1833.6 mm, inside diameter 1514 mm, height 137 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.