Slewing Rings/Kaydon references/HS6-29P1Z← View all models

PRIUS BEARINGS · SLEWING RING BEARING

HS6-29P1Z
slewing ring bearing

HS6-29P1Z is listed as a Kaydon catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 33.4 in, inside diameter 25 in, height 2.2 in. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL HS6-29P1Z
Kaydon catalogue section reference for HS6-29P1Z

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

HS6-29P1Z
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

ModelHS6-29P1Z
Brand / alternativePRIUS BEARINGS · Alternative for Kaydon
TypeNo gear HS series
Outside diameter OD (in)33.400 in
Inside diameter ID (in)25.000 in
Overall height HT (in)2.200 in
Weight (lb)186 lb
Outer hole circle OBC (in)32.000 in
Inner hole circle IBC (in)26.500 in
Mounting hole count15 / 18
Moment rating (ft-lb)111,900 ft-lb
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

Kaydon · No gear HS seriesHS6-33P1Zoutside diameter 37.4 in, inside diameter 28.83 in, height 2.2 in →Kaydon · No gear HS seriesHS6-25P1Zoutside diameter 29.5 in, inside diameter 21 in, height 2.2 in →Kaydon · No gear HS seriesHS6-37P1Zoutside diameter 41.25 in, inside diameter 32.83 in, height 2.2 in →Kaydon · No gear HS seriesHS6-21P1Zoutside diameter 25.5 in, inside diameter 17 in, height 2.2 in →

FREQUENT QUESTIONS

Can PRIUS review an alternative for HS6-29P1Z?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For HS6-29P1Z, provide the complete reference and suffix, confirm outside diameter 33.4 in, inside diameter 25 in, height 2.2 in, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.