Slewing Rings/IMO references/31-40 2800/2-07420← View all models

PRIUS BEARINGS · SLEWING RING BEARING

31-40 2800/2-07420
slewing ring bearing

31-40 2800/2-07420 is listed as a IMO catalogue cross-reference for a PRIUS slewing ring alternative. The catalogue envelope is outside diameter 3136 mm, inside diameter 2562 mm. Send the complete model suffix, mounting details and operating loads for review.

Request a quote →Browse all models ↗
PRIUS alternative supply2D section referenceRFQ engineering review

DIMENSIONAL REFERENCE

MODEL 31-40 2800/2-07420
IMO catalogue section reference for 31-40 2800/2-07420

Catalogue illustrations may cover a bearing series. Confirm the exact model, suffix, dimensions and hole pattern against the final drawing before selection.

ENGINEERING DATA

31-40 2800/2-07420
parameters

Catalogue reference dimensions and load information for preliminary selection. Confirm the final PRIUS drawing and ratings before ordering.

Model31-40 2800/2-07420
Brand / alternativePRIUS BEARINGS · Alternative for IMO
TypeSlewing ring bearing
Outside diameter Da (mm)3136.0
Inside diameter di (mm)2562
Raceway diameter (mm)2837
Inner / outer reference (mm)2850
Outer pitch diameter (mm)2965
Inner pitch diameter (mm)2640
Mounting hole count48
Gear diameter (mm)3080
Gear module20
Gear tooth count154
Tooth correction+0.50
Tooth force, nominal (kN)296
Tooth force, maximum (kN)525
Basic static radial load rating C0r (kN)2334
Basic static axial load rating C0a (kN)27973
Basic dynamic radial load rating Cr (kN)1113
Basic dynamic axial load rating Ca (kN)5534
Weight (kg)3267 kg
Confirm dimensions & request a quote →

NEED A MATCH?

Send us your
drawing or load case.

We can review the mounting envelope, load requirements and delivery target for a PRIUS BEARINGS slewing ring alternative.

Start an enquiry →

MODEL SELECTION

Related slewing
ring bearings

Compare references from the same brand catalogue, prioritising the same family and arrangement, then nearby available envelope dimensions. Related references are not confirmed interchangeable.

IMO · Slewing ring bearing31-32 2800/2-07320outside diameter 3136 mm, inside diameter 2582 mm →IMO · Slewing ring bearing31-25 2800/2-06840outside diameter 3096 mm, inside diameter 2619 mm →IMO · Slewing ring bearing31-25 2500/2-06830outside diameter 2786.4 mm, inside diameter 2319 mm →IMO · Slewing ring bearing31-32 2500/2-07310outside diameter 2822.4 mm, inside diameter 2282 mm →

FREQUENT QUESTIONS

Can PRIUS review an alternative for 31-40 2800/2-07420?

We review the model, dimensions, load case, mounting arrangement and quantity before confirming a quotation.

What information is needed for selection?

For 31-40 2800/2-07420, provide the complete reference and suffix, confirm outside diameter 3136 mm, inside diameter 2562 mm, and include gear configuration, mounting-hole details, loads and operating speed.

Can you check an alternative from a drawing or sample?

Yes. Email the drawing, catalogue page or clear photos to sales@priusbearing.com. Our team can review the fit before quotation.